PX600 Film, Silver Shade - 5 pakker

Passer til Polaroid C600 kamera, eller alle kamera som kan bruke 600 film.

Instructions:
9 Quick Steps for Optimized Results:

1.Choose the right film and put it into your camera
2.For your first shots, we recommend to shoot at 17-24°C / 63-75°F as the PX film is very sensitive to temperature
3.Set the camera's lighten/darken wheel to middle setting
4.Hold camera stable, especially at low light levels
5.Make the first magic shot
6.Shield picture from light immediately (cover with your hand)
7.Develop the picture upside down for 60 - 90 seconds
8.Take a deep breath, turn the picture over and inhale your FIRST PX SILVER SHADE SHOT
9.Store your PX 600 film pictures cold and protected from light, to prevent fading contrast and colour changes


The chemistry of the PX Silver Shade First Flush Edition films is very sensitive to temperature.


For most balanced results, it is recommended to provide a medium room temperature of 17-24°C (63-75°F)

In extreme cold (10°C and below), the image will become very light, quickly resulting in almost white tones, erasing most contrast. Use with caution.

In extreme heat (27°C and above), the image will turn very dark and change to reddish, orange, and yellowish shades of extreme contrast

TIP: When shooting in extreme temperatures, you can put the image in your pocket to warm it when out in the cold and keep it in the shade or cool water to avoid too much heat when in hot surroundings.

The PX Silver Shade First Flush Edition films are very sensitive to adjustments of the camera's lighten/darken wheel.

Do always put it to the middle setting for most balanced and optimized results.

Changing the wheel's position into the lighter area will result in overexposed pictures.

Changing the wheel's position into the daker area will result in underexposed pictures.

When the picture exits your camera after its exposure, you will see a beautiful blue surface where the image will appear. This is the chemical paste which shields the exposed image from receiving more light (and thus overexposing).


TIP:

As this paste is not 100% light-proof, it is recommended to shield the developing picture from bright light sources.

1) By putting it into a pocket or box
2) By putting the face of the picture upside down
3) By shielding it with the darkslide